Home »
Products » Oil Drilling Chemicals
Oil Drilling Chemicals
SV Enterprises offers of oil drilling chemicals, which
are widely appreciated for their quality and reliability. These chemicals
are noted for their efficiency and purity of ingredients. The broad spectrum
of oil field chemicals include Bentonite Powder, Hydrated Lime, Calcium
Carbonate, etc. Different grades are available as per the requirement of the
clients.
Bentonite Powder
| TEST |
REQUIREMENT |
RESULT |
| VISCOMETER DIAL READING AT 600 RPM. |
30. MIN. |
34.00. |
| YIELD POINT/PLASTIC VISCOCITY RATIO. |
1:3 MAX. |
02.25 |
| FILTERATE VOLUME |
15 CM3 MAX. |
13.50 |
| RESIDUE ON 200 MESH 75 MICRON SIEVE. |
4% MAX. |
02.50. |
| MOISTURE. |
10% MAX. |
09.25 |
|
|
 |
Hydrated Lime
| TEST |
RESULT |
| % of available Lime as Ca(OH)2 |
96+1 |
| Active Cao % |
73+0.7 |
| Acid Insolubles Max.% |
0.1 |
| Iron & Alumina as Fe2O3 & Al2O3 |
50 PPM |
| Magnesia as MgO Max % |
0.5 |
| Mess (BSS) |
500 |
|
|
|
Calcium Carbonate
| CACO3 |
96 Min. |
| SIO |
1.5% Max. |
| MGO |
1% Max. |
| FE2O3 |
0.1% Max. |
| ALKALI (WATER SOLUBLE) |
0.1% |
| PHYSICAL ANALYSIS |
| COLOUR |
Super Snow white |
| Specific Gravity |
2.65 |
| Oil Absorption |
18 to 20 |
| ph (10% solution) |
8.5 |
| Bulk Density |
1.5 gms/lt. |
| Whiteness on gloss reflectometer compared with mgco3 as
100% standard. |
96% |
| Mesh size, 300 mesh max. retention by wet sieve method. –
white |
0.25 |
|
|
|
Barium Sulphate
| Hardness |
3 |
| Specific Gravity |
4 |
| Alumina Al2O3 |
0.5% |
| Barium Sulphate BaSO4 |
79% |
| Silica SiO2 |
1% |
| Ferric Oxide. Fe2O3 |
0.5% |
| Calcium Oxide CaO |
1.2% |
| Magnesium Oxide MgO |
0.4% |
| Sulphar Trioxide SO3 |
0.7% |
| Loss On Ignition |
0.6% |
| Residue on 240 M.B.S Sieve |
1% |
| Ph Value |
6.5 |
|
|
|
Ammonium Chloride
| Assay |
99.5% |
| Moisture |
0.5% max |
| PH |
4.5 to 6 |
| Iron |
50 ppm max. |
| Mater Insoluble in water |
0.01% max. |
| Sulphate as (NH4)2SO4 |
0.05% max. |
|
|
|
©
S.V. Enterprises. All Rights Reserved (Terms
of Use)